Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Water lines Pictures

+ Reply To Thread
Posts: 1-9 of 9
2013-07-16 16:04:19
#1
Water lines Pictures
Anyone have pictures the way set up their water lines feed/return? I'm doing t25 oil/water cooled.

I'm planning to do the throttle bottle but I need some pics to know where to start, tia
Last edited by ser101 on 2013-07-16 at 22-28-05.
2013-07-16 16:22:45
#2
Do you have a DE or DET?... With a DET you can use the stock feed location with banjo setup.
2013-07-16 16:31:36
#3
Originally Posted by SE-Rawkus
Do you have a DE or DET?... With a DET you can use the stock feed location with banjo setup.


sorry forgot to mention..

de + t 9:5
2013-07-16 18:44:37
#4
I just did mine. The small hose that runs from upper radiator hose, right after therm housing, to the throttle body. I sent the end from upper rad hose to the turbo then from the turbo on other side back to the throttle body. Basically sent the coolant to the turbo first, then back to throttle body. So everything is stock except the re-route to the turbo first. Had car all fired up and bled system, all is good. Can feel hoses get warm so I know coolant is running through them just fine. Hope that helps ya out.
2013-07-16 19:32:10
#5
Try to use the upper most coolant hose has the hot water exit on the turbo and lower line as the cold in, so when the car is shut down the water will naturally flow upward


edit:
Last edited by unijabnx2000 on 2013-07-16 at 19-33-58.
2013-07-17 06:45:25
#6
Thx guys, but anyone by chance at has pics, please do so and post them up
2013-07-19 14:12:16
#7
bumo
2013-07-20 13:07:00
#8
Ill be under my ride today ill post one
2013-07-20 18:36:50
#9





Tap into this line with a three way and you should be fine
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top