Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: external wastegate help. please!

+ Reply To Thread
Posts: 61-70 of 76
2013-06-06 17:38:16
#61
Your A/F ratio is rock solid!

Sorry, had to! It sounds pretty good, do you have full exhaust on it? Seems like I hear a leak or open down pipe.

Brent
2013-06-06 18:05:26
#62
He doesn't have a full exhaust Brent.............

And why is your vacuum only at circa 10?? Also, why is your wastegate only fed by 1.75 runners??? Why is there an old feed line running right across the (hot) valvecover?? Why is your A/F not hooked up??

There are so many things wrong with this build.............

I feel terribly sorry for that little ol' DE and what you are putting it through. But it's a testament to how stout these little engines are
Last edited by Boostlee on 2013-06-06 at 18-06-35.
2013-06-06 18:54:40
#63
Actually its a gtir motor i think
2013-06-06 18:57:46
#64
^^ Incorrect...........

Just GTI-R plenum and associated hardware

Either way, it's a DE/DET/GTI-R bastard child hybrid
2013-06-06 19:49:05
#65
I dont like how the waste gates attached.. Other then that it looks better lol
2013-06-06 21:24:54
#66
Originally Posted by coach
Your A/F ratio is rock solid!

Sorry, had to! It sounds pretty good, do you have full exhaust on it? Seems like I hear a leak or open down pipe.

Brent


Haha @ afr.
And its got open dp and wastegate is open too.
2013-06-06 21:30:29
#67
Originally Posted by Boostlee
He doesn't have a full exhaust Brent.............

And why is your vacuum only at circa 10?? Also, why is your wastegate only fed by 1.75 runners??? Why is there an old feed line running right across the (hot) valvecover?? Why is your A/F not hooked up??

There are so many things wrong with this build.............

I feel terribly sorry for that little ol' DE and what you are putting it through. But it's a testament to how stout these little engines are



Vac has always been at 10 since I got tye car .
What are 1.75 runners?
Its temp (oil line)
I only have a open dp. Ill have afrs hooked up by next week promise.

Im very easy on my motor. It hasnt seen full throttle but that video and the first times I was testing her out.

Just testing right now man.
Getting ready to get a jwt ecu 72lb msd and 300zx
2013-06-06 21:31:47
#68
Originally Posted by lynchfourtwenty
I dont like how the waste gates attached.. Other then that it looks better lol

I thought that was the best place to get it put. Its got ZERO room wheb the dp is hooked up so ill place it else where.
Never done a wideband so should I hook it around the exhaust upwards/downwards/
Last edited by C-Lawless on 2013-06-06 at 21-58-08.
2013-06-06 21:32:51
#69
Might get a JWT ecu 72lb injectors and 300zx maf.
What do yall think?
2013-06-06 21:53:16
#70
Originally Posted by C-Lawless
Originally Posted by Boostlee
Also, why is your wastegate only fed by 1.75 runners???

What are 1.75 runners?


I bet it's not even 1.75, i bet they just drill one hole for the wastegate so it's only let gas out for #1.

Originally Posted by C-Lawless
Originally Posted by lynchfourtwenty
I dont like how the waste gates attached.. Other then that it looks better lol

I thought that was the best place to get it put. Its got ZERO room wheb the dp is hooked up.

that's the worse place you can put it. the info on the best place for that manifold can be found on google.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top