Thread: I wish we had a custom fuel pump hanger like this one for the G35!

another example:



Can anyone find a reason why this design wouldn't work on the FWD chassis cars?

Brent

That is badass

Nice looking piece....

Im sure with some modification to the inside of the tank you could get a dual pump hanger to work with no issues. Once you remove the plastic seat in the tank the actual sump and baffled areas itself should be able to fit two pumps side by side or in line with one another without a problem. Again, nobody makes one because they wouldnt sell many. Thats why. Not many of us need two pumps. Being they have single pumps now that can support about 650whp even on stock fuel lines.

It is just the ease of install on it. A custom hanger would make it simple and I don't want dual pumps for HP support, I want dual pumps for redundancy. If a pump fails for whatever reason, I want the second pump there running. I am running a walbro like most, but have the new AEM pump sitting on the shelf. Just haven't had the desire to tear into the tank and swap it out. I was thinking of running the walbro in the tank feeding a surge tank that has my AEM pump in it. The Radium Engineering unit has caught my eye.

Brent

Powertune Australia is also making custom Cnc machined billet hangers as well
Powertune - By Brand - Products