Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Guesses on HP for my setup?

+ Reply To Thread
Posts: 1-6 of 6
2012-10-28 03:06:02
Guesses on HP for my setup?
I've just finished putting together my setup and here's the specs:

stock W11 (block and head)
stock cams and intake manifold
MSD 72lb Inj. w/ JGY fuel rail
255 warlboro
Z32 MAF (Blow through)
Top-mount lovefab Manifold w/ ceramic coating
Nistune type3 board
Ebay front-mount (Don't remember the exact size right now, support over 400hp though)
2.5" hotside intercooler piping and 3" coldside
Holset HX35 Turbo
44mm external wastegate
AEM Truboost controller

This is going to be tuned on pump gas. I know the cams are going to be my limiting factor, but what kind of power should I expect from 15-20psi? The turbo's a T3 frame, so I'm hoping for somewhere around 350. Is this feasible, or am I overlooking something?
Last edited by OKB on 2012-10-28 at 03-11-10.
2012-10-28 03:16:20
sr cams really aren't that bad...guys have made sick power on stock heads. I think 350 is a reasonable guess, but I wouldn't be surprised to see it do better. 20psi makes good numbers when it's tuned right.
2012-10-28 03:33:56
Good to know. I'm not really sure where to get it tuned though because everyone in Colorado owns a Subaru or Evo. Stupid snow... Hopefully I can pull a little higher than that, if you say it's possible though.
2012-10-28 12:04:53
2012-10-29 23:05:40
2012-10-30 00:22:27
when u gonna dyno
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top