Thread: ebay oil drain kit- will it pop?

Ill loop it around flat and see if drains welll. Ill suspend the line between the block and rad.
I have a feeling its not going to work well but its worth a try

heres my setup, 2 45's and some silicone hose.

i wouldnt...just use a piece of rubber hose, its going to be a couple inches at most

@lynch420 and chapnutz1

Okay i get the idea, ill just ditch the line and use the fittings and flange and grab a -10an (5/8) rubber hose

Thanks guys, this was the point I was stuck at bc the kit I bought the drain stuff broke and is laying some where on interstate 10

the thing is you want the least amount of restriction possible.. so unless you already bought this kit, i could kindly guide you to the exact parts i used..

btw whats your setup?


Edit: on further inspection, it looks like you could just use them 2 45's and a rubber hose like you said.

Idk how specific u want it, but here:
RR motor
Safcii
W10 turbo,mani,j pipe
50lb msd inj
Oem DSM 1G bov
Oil/water temp and boost gadge


I tuned it (before the oil drain went AWOL) for 11.5 afr +30% load/throttle and 14.7 for -30% load/throttle

is the car already boosted or your going to boost it? if you haven't tapped your block yet deff mock up the turbo when u get the stuff before you drill, i didnt do this so i had to come up with something lol.

what do ya mean oil drain went awol?

No its boosted already, and by awol I mean my oil temp spiked high. I shut the car off on the high way, pulled over and my oil drain flange and rubber hose was gone. Oil was creeping out of the turbo and when I checked the levels it was very low. I towed it home, took the turbo off and inspected all the lines and clamps. This is where I'm at

oh i see, sorry to hear that.

I think it was my fault I didn't use locktite on the oil drain bolts, I may have come off and caught onto the high way and ripped off. Finally got to use AAA lol

You guys are cool, thanks for not flaming!