Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: safc II not pulling fuel

+ Reply To Thread
Posts: 11-20 of 26
2012-05-05 07:36:31
Turns out his safc is not registering tps, he's going to look over the sodering and see what happens
2012-05-06 04:08:43
Update: it appears that my tps is garbage. Checked the volts at closed throttle and was .22 but went to wot throttle and it didn't change at all no matter how much throttle I gave it. The tps was damaged prior to taking the motor out and putting it in the back of a truck.
2012-05-06 05:11:26
Glad we figured it bro! Hopefully after u get a new tps your tuning will go smooth let me know how how the tunning goes on thurdays
2012-05-06 05:18:33
Im glad we figured it out too i was starting to get worried. For sure man im pumped!
2012-05-07 02:57:17
The voltage that i posted earlier was wrong its reading 2.28 at closed throttle but when i stick the volt meter in the pins, the safc goes down to 4.11 from to 2.28 like the volt meter says. Why would that cause the safc to change the throttle volts.
2012-05-07 22:41:53
2012-05-08 02:59:36
Bc the circut is closed (on the tps when u stick the pins in to complete the circut) and is porbly showing its WOT voltage on the safc.

I didn't answer bc I wasn't sure what I was reading, grammer wise but u said it right the first time
2012-05-08 03:10:46
Sorry i suck a grammer lol. I get my tps tomorrow and hopefully it fixes my problem so i can get my tune thursday.
2012-05-08 03:52:07
Nah I wasn't talking down on ur grammer I was confused on what I read but u said it right
2012-05-08 03:53:29
Oh ok then thats good.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top