Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Need Advise

+ Reply To Thread
Posts: 1-4 of 4
2012-05-02 02:17:22
#1
Need Advise
Finally setting up a build of my GTi-R motor. Need recommendations for the Ignition setup. This is for a track car setup for road course work. Please feel free to give input. The parts list is as follows:
2000 Sentra SE w/ Performance Package
Motor
’92 GTi-R Transplant
Custom Modified Crossmember
PTuning Solid Steel Motor Mounts
BC Stage 3 Cams 272˚ / 272˚ 12.5 mm Lift
BC Single Springs
BC Titanium Retainers
Electrical
AEM EMS Series 2
AEM 3.5 Bar Map Sensor
AEM Intake Temperature Sensor
PTuning Custom Tune
Battery Relocated To Trunk
Summit Racing Battery Box
4 Gauge Street Wires Wire
Streetwires Distribution Block *
Custom 4 Gauge Grounding Kit
Custom JE Import Performance Engine Wiring Harness * *
Ignition
NGK V-Power BKR7E Plugs
Boost
AEM Boost Solenoid
Garrett GTX3076R Turbo
TIAL Sport .82 A/R V-Band SS Exhaust Housing
PTuning Equal Length SS Tubular Manifold
TIAL Sport MV-R 44mm Wastegate
TIAL Sport QR Bypass Valve
Fuel
SARD Fuel Regulator Setting Meter
NISMO Adjustable Fuel Pressure Regulator*
Walbro 255 LPH in tank fuel pump’
FIC 1050cc Injectors
Oil
Redline Oil 10W-40
Circuit Sports Magnetic Oil Plug
Mocal 180˚ Sandwich Plate Oil Thermostat
Mocal 1/2" BSP x - 10 Fittings
Aeroquip AQP Stainless Steel Braided Hose
Pegasus Racing Reusable Aluminum - 10 AN Hose Ends
Aeroquip Hose Clamp .81 ID
Canton *6" Extruded Aluminum Remote Mount Canister Oil Filter
Canton 8 Micron Synthetic Oil Filter Element
Pegasus Racing − 12 O-Ring Port x − 10 AN Fitting
Oil Cooling
Setrab ProLine STD 25 Row 6 Series Oil Cooler
Setrab Oil Cooler Mounts
Setrab M22 x -10 Oil Cooler Adapter Fitting*
Coolant
Mishimoto 2 Row Aluminum Radiator
Mishimoto 1.3 BAR Radiator Cap
Mishimoto Magnetic Drain Plug
Energy Suspension Radiator Bushings
G Spec Custom Radiator Hose
Moroso Aluminum Radiator Recovery Tank
BoostController.com Silicone Radiator Hose
BoostController.com Non-Perforated Hose Clamps
NISMO 62˚ C Thermostat
G Spec Aluminum Underdrive Water Pump Pulley
Redline Water Wetter
Intake
Injen Cone Filter*
2.5" Tube and Fin Front Mount Intercooler w/ a 24" x 11.5" x 3" Core
Exhaust
VRS 3" Stainless Steel Downpipe
VRS 3" Stainless Steel Exhaust
Vibrant Metal Cat
Vibrant Ultra Quiet Resonator
NISMO Exhaust Bushings
2012-05-02 02:25:22
#2
1) I hope u own a bank
2) good luck
2012-05-02 05:39:02
#3
I can get you a good deal on the VRS parts, PM me if you need them.
2012-05-02 05:41:27
#4
my opinion on what ignition set up to run is oem. brand new oem cap and rotor, oem nissan plugs, good spark plugs.

i did 400whp on all oem ignition.

stratton.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top