Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Boosted Roller Rockers

+ Reply To Thread
Posts: 141-150 of 153
2012-09-28 21:53:29
i like this thread
2012-10-03 04:22:43
Sneak peek! Took 5 cans of brake parts cleaner to get all of the oil off of it. Poor block had leaky seals for a while.

My 2nd and best tap job yet!

Last edited by Vadim on 2012-10-03 at 18-48-22.
2013-03-04 20:40:50
Been running boosted for about two weeks now .

Got 3" piping in there for turbo intake no problem, I was quite surprised.

2013-03-04 21:51:12
My BOV is on my Intake side similar to how you have your's setup with the exception that I have a S13 240sx. What type of piping are you using to recirculate back to the maf that you have going from your BOV back to the exhaust side?
2013-03-04 22:07:38
It's just some Home Depot special dryer hose. It's a little too small for my turbo intake though. I had to cut it to get it to fit .

2013-03-05 01:30:29
any virtual dyno runs?
2013-03-05 02:01:03
Originally Posted by tomas527
any virtual dyno runs?

Still ironing out some setup issues, so far 200whp/200wtq at 7 psi peak drops off at 5-6 psi at redline (I have a 5 psi gate so it's overboosting)
2013-03-13 16:05:28
2013-03-14 05:09:36
Not much to report, trying to get my MAP sensor to display correct data and got a chain slap on startup, so new tensioner is probably needed.
2013-08-13 19:38:55
I've had a boosted RR motor for 3 years and 50K miles. Up until I misshifted it ran awesome. Made 330whp and could get about 25 mpg. I swapped it out with a 31k RR just a few months ago and it's running just s strong. I run 12-15 psi on it. S3R cams.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top