Help Idetifing Engine BB or Stock DE-T?
Okay guy's i have been searching for my answers here and on both Sr20forums but couln't find what i needed it. Q's are?
Is this the BlueBird engine I now this is a T28 turbo. I went to a shop venus-Auto and they saud this was a BB engine but a forum member came and said that the injectors should be purple and that it din't have oil squirters. The oil lines are not connected were they should be only the returning line is. But the feed goes were the oil filter is at. I need help i was reading a thread hot to i detefy ur engine but it din't say what color injectors it should have.
1995 G20 OBD11
Im swapping a BB engine or aveir in my car this week im going to go pick one out at venusaito.
So when installing it do i use my distrubitor since it's a OBD11?
What else should i use from my car?
i now i need to swap as many sensors as i can. but what else?
I now i need to go pick up a programer to. since i don't have a extra ecu to send to calum.
I have BC STG 2 cams. Im going to get just the springs sinc i don't now how to change retainers. Do the cams fit?
I already have UR pulleys that im going to put.
i think i might buy a flywheel but a 11lb.
Well any help is aprecciated I now thers a thread on the swap but couldn't find it. But i need details like the distrubitor since its OBD11.
These are pictures from the engine.
Is this the BlueBird engine I now this is a T28 turbo. I went to a shop venus-Auto and they saud this was a BB engine but a forum member came and said that the injectors should be purple and that it din't have oil squirters. The oil lines are not connected were they should be only the returning line is. But the feed goes were the oil filter is at. I need help i was reading a thread hot to i detefy ur engine but it din't say what color injectors it should have.
1995 G20 OBD11
Im swapping a BB engine or aveir in my car this week im going to go pick one out at venusaito.
So when installing it do i use my distrubitor since it's a OBD11?
What else should i use from my car?
i now i need to swap as many sensors as i can. but what else?
I now i need to go pick up a programer to. since i don't have a extra ecu to send to calum.
I have BC STG 2 cams. Im going to get just the springs sinc i don't now how to change retainers. Do the cams fit?
I already have UR pulleys that im going to put.
i think i might buy a flywheel but a 11lb.
Well any help is aprecciated I now thers a thread on the swap but couldn't find it. But i need details like the distrubitor since its OBD11.
These are pictures from the engine.