Thread: is this a fwd manifold

Yes.

89-94 Nissan 240SX S13 S14 SR20DET T3/T4 Top Mount Turbo Manifold | eBay

I dont think its braced though.

Ur ganna have fun doing all the needed for this to work....

Honestly I don't think its too bad. Custom downpipe. Half rad and done. I'd rather run a log manifold than this though.

yeah i passed on it after seeing that pic, i dont mind fabbing it up it just look like potential problems, me and welding get along very well

the lil brace it comes with does nothing, this is cheap thin wall "stainless" they work on a budget but your gonna have brace it, especially the wastegate area

Its not the runners that crack, its the wastegate flange. I used this same manifold but welded the wastegate flange to the turbo flange. I also added a second heavy duty brace from the head flange to the turbo flange. Used it for a year with no issues with it cracking.

As far as fitment, unless your willing to go to a half width civic radiator and possibly notch the upper radiator support, forget about running it. As far as flow goes, it definitely flowed well enough to make good power without having backpressure issues. This manifold will outflow a log manifold period, end of story but again its meant for RWD and its cheap so dont expect it to last forever.