Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: upgrading turbo, bigger oil feed? Restrictor?

+ Reply To Thread
Posts: 1-6 of 6
2012-03-01 04:54:53
#1
upgrading turbo, bigger oil feed? Restrictor?
I currently have a t25 with a small oil feed line and a restrictor, im upgrading my setup and picked up a turbonetics t04b super h (journal bearing), would a larger oil feed line work better? no restrictor for larger turbos correct?
2012-03-03 16:41:49
#2
Anyone?
2012-03-03 16:53:18
#3
What size line and restrictor are you using?
2012-03-03 16:59:33
#4
most likely if its a braided line its a -3an line which is still pleny for a T3/T4 turbo. Only difference is you wont need to use a restrictor on the T3. I didnt use a restrictor with any t3 or bigger setups and never had any issues. -3 feed line as well.
Last edited by ashtonsser on 2012-03-03 at 17-06-25.
2012-03-04 23:00:26
#5
Its which ever is reccommended for the t25, .68 or something along those lines...Is the -3an smaller? if so then thats what i have...
2012-03-04 23:11:08
#6
Use a -3 and call it a day.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top