Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: B15 won't go into 2nd gear! Help

+ Reply To Thread
Posts: 31-34 of 34
2012-04-24 01:10:26
#31
Sorry it took forever to get back to this, school is killin me. Alright spoogy there was a check ball hanging out on a magnet that sits in there, which I assume would fix the problem, but why would the check ball come out? If it did once, it's likely to do again I would assume, has yours since? Secondly, I have a cracked bearing on the shaft that sits on the outside, under the rear main bearing cover. I'm assuming that's the main shaft? Forgive me, I know nothing about transmissions. I'm planning on looking through it, putting that check ball back in, and replacing that bearing. If any of you have any suggestions, let me know, I appreciate/need any help I can get.
2012-04-24 01:13:54
#32
I have yet to pull the stacks, gotta go back to school, but I'll look to see if that spring is broken where the ball came out of. Also I found that you can get the parts (check ball and or spring, whatever you need) from courtesy nissan. Here is the link for anyone else who has similar troubles or needs parts: 322 Transmission Gear :: Power Train :: Genuine Nissan Parts :: Sentra Parts (B15U) 2000-2006 :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com
2012-04-25 00:53:35
#33
Here is the link to springs, check balls, forks, etc, the other is gears/bearings/ stack parts.
328 Transmission Shift Control :: Power Train :: Genuine Nissan Parts :: Sentra Parts (B15U) 2000-2006 :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com
2012-04-25 01:11:59
#34
Fyi, all you need is the part number and any authorized Nissan dealer can get you the parts.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top