Thread: Rebuild Kit

I got an SR20DE for next to nothing and I have decided to turbo the thing. I have stripped the entire engine and thoroughly cleaned the block and in the process of cleaning the head and I will be tapping the block for the return and also tapping the block for the oil squirters as well. What I want to know is where can I get a full rebuild kit for the high port SR20 motors. I am going turbo so I am thinking to get the SR20DET high port rebuild kit. Can you let me know where I can get this and a cost? I will need all gaskets and seals, water pump and oil pump, tension chain and guides. Thanks in advance and tell me where I can look, preferably OEM stuff. I will be going with ACL bearings, DET pistons with either total seal rings or OEM rings, and an S15 T28 with a pulsar manifold, all braided lines, 480CC injectors, Z32 MAF, Emanage Ultimate and whatever else to match the setup. This is all going in an AWD B13.

Jason.

Pics of the AWD B13 (underneath please).

GregV should have all the parts you need.

^x2 gregv is where it should be at

where would you tap the block for oil squirters? pics please

I would also like to see the awd b13 :-)

If gregV dont have em. try Justin at InfinitiPartsusa.com/EverythingNissan.com

there are kits on ebay for the gtir for gaskets
http://cgi.ebay.com/ebaymotors/Nissan-SR20DET-GTIR-Engine-Gasket-Kit-RNN14-Pulsar-SR20_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ33667QQihZ008QQitemZ180168305944QQrdZ1QQsspagenameZWD1V

the time and money it takes to drill and tap and mill a de block for det oil squirters is not worth it. skip the total seal rings and go with the oem rings.

So what not to worry about the squirters? On the underside of the block you can see there are four flat areas where the squirters are usually. I was thinking to get the squirters from a damaged DET block and get the pitch from the squirter bolts and go to the local store and pickup a drill bit and tap and do it myself. I just did the tapping of the block and I don't see it being too difficult. I will take your advice on the oem rings. Also for reference, the DET rings and DE rings are they the same?

Bump anyone know where I can get these items. I contacted GregV but not reply yet.

Where's the pics?

Call GregV, great guy and can get anything you need, and won't BS you.

I sent him a PM, I live in Trinidad so for now I will email. If not later on I will give him a call. I will get pics this week I got the camera working again.