Thread: disturber cap for a b14

Hey does any1 know if they sell a msd disturber cap for a b14?

They do not. It is something you will have to do modify yourself.

The best thing you can do is convert bacl to a B13 dist, coil and ignitor

well here the problem i have, i'm running t3/t4 turbo an i took it to get tune n dyno. When they were bring up the boost at 18teen pounds around 6500 rpm my car will start to bogg. N tuner was in the car for 2hours n 25min fixing lil things here and there n told me i need and MSD digital 6. But do you think the B13 Dist will work?

If you are just putting in a digital 6 then you can just mofify you b14 dist. If you go on the JWT site you can find a write up on this,

iv seen alot of Nissan turbo that dont use MSD and there making 400 to 500hp, im trying to make around 350hp to the wheels & ill be satisfied.

There is no reason why you are at 18 PSI and not making 350. What is your setup. Also you could have tried closing down the gap on the spark plugs.


Tell me what your setup is please.

i have a gti-r with rc injectors, aem standalone ecu, aem map sensor

aem boost solenoid

aem distributor disk

Well you are not getting to 350 WHP with an internal wastegate GTIR Turbo. To get to 350 WHP you will have to change to an external wastegate setup or go to a larger turbo something like a GT28RS or my favorite GT2871R. I would also recommend some JWT cams for the GTIR engine.