Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Post Actual JimWolfTechnology (ECU) Dyno Results

+ Reply To Thread
Posts: 21-30 of 40
2011-12-20 13:40:23
#21
Just got a hold of a jwt ecu i sent mines to get reflashed yesterday so hopefully by 1st week of Jan ill have some dyno numbers to throw up here
2011-12-22 16:23:54
#22
cool man , cant wait.
2012-01-07 19:41:47
#23
Stock U12 SR20DET setup @ 12 psi
3" exhaust
JWT ECU
207 whp Dynojet


Same setup + S4 cams and 16 psi. No ecu retune.
229 whp Dynojet


Same setup / S4 cams /GT28R @ 17 psi / 480cc @ 4 bar /Z32 maf
JWT ECU reflash for above
278 whp Dynojet


S14 SR20DET / 2871 .86 @ 19 psi / TODA 264 / 740cc / Z32 maf / ISIS IM
JWT ECU set for above. Got knocking with this tune.
350 whp hubdyno


Gonna build the engine and use my JWT tune as a basic for my Nistune setup.
JWT delivers good tunes but I want controll the stuff myself.

Here's another one from my friends setup:
SR20DE 10.5:1 / GT28RS@11 psi / Cobra Maf / 50 lbs. inj.
JWT ECU for above
264 whp Dynojet
2012-01-07 21:03:07
#24
Wow, long time, no see!
2012-02-25 19:01:33
#25
Originally Posted by Andreas
Here are a few I can remember with JWT ECU

SR20DET S4 cams 370cc injs @ 4 bar, Bored MAF, W10 T25 Turbo @ 15 PSI with aluminum flywheel 260 WHP and 270 LB Ft Torque ( ran 12.7 @ 113 MPH ) B14 SER


What other mods were you running when you put down these numbers?
2012-02-25 20:16:24
#26
Originally Posted by Barney'sB14
What other mods were you running when you put down these numbers?


SR20DET W10 T25 Turbo @ 15 PSI
S4 cams
370cc injs @ 4 bar
Nismo FPR
Bored 54mm MAF
JWT Pop Filter
JWT aluminum flywheel
ACT clutch
3 inch VRS Down Pipe
3 Inch VRS exhaust
Front mount intercooler with 2.5 inch intercooler piping
UR Crank Pully

Full body B14 with AC



260 WHP and 270 LB Ft Torque ( ran 12.7 @ 113 MPH ) B14 SER
2012-02-25 22:45:21
#27
Originally Posted by Andreas
SR20DET W10 T25 Turbo @ 15 PSI
S4 cams
370cc injs @ 4 bar
Nismo FPR
Bored 54mm MAF
JWT Pop Filter
JWT aluminum flywheel
ACT clutch
3 inch VRS Down Pipe
3 Inch VRS exhaust
Front mount intercooler with 2.5 inch intercooler piping
UR Crank Pully

Full body B14 with AC



260 WHP and 270 LB Ft Torque ( ran 12.7 @ 113 MPH ) B14 SER


That on slicks?
2012-05-08 11:00:46
#28
I heard this car ran a 10.8 1/4 mile pass! Congrats guys!!
2012-05-08 14:54:28
#29
Originally Posted by Picasso
I heard this car ran a 10.8 1/4 mile pass! Congrats guys!!


which car?
2012-05-08 17:49:23
#30
Pulsar GTiR
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top