Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: idle and break up issues after swap

+ Reply To Thread
Posts: 1-4 of 4
2011-11-10 01:58:19
#1
idle and break up issues after swap
Ok if u look at my signature u can see my setup...if my tps is at .45volts and 4.0 at wot....then my idle is at high....2k to be exact. It runs great but it will break up a little at high rpms... Ok but if I move my tps to around .15volts and 3.89 at wot it idles like a champ at 1k but breaks up at 4k.... Tps shld be ok...second one I used ...any suggestions boys ???
2011-11-10 13:21:32
#2
did you tune it yet or hows your timing set??
2011-11-23 20:38:42
#3
check the maf voltage i have similar problems when the maf is not connected all the way or just not working.
2011-11-24 18:16:21
#4
check your spark plugs and the gap. or put in a new set.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top