Thread: idle and break up issues after swap

Ok if u look at my signature u can see my setup...if my tps is at .45volts and 4.0 at wot....then my idle is at high....2k to be exact. It runs great but it will break up a little at high rpms... Ok but if I move my tps to around .15volts and 3.89 at wot it idles like a champ at 1k but breaks up at 4k.... Tps shld be ok...second one I used ...any suggestions boys ???

did you tune it yet or hows your timing set??

check the maf voltage i have similar problems when the maf is not connected all the way or just not working.

check your spark plugs and the gap. or put in a new set.