Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Lynch's 6spd / VE-T thread

+ Reply To Thread
Posts: 1,821-1,830 of 1,893
2015-10-25 23:33:48
#1821
yeah b15's have remote reservoir.

The b15 master i used also said 5/8"
2015-10-25 23:35:18
#1822
i'll take a pic later of the 2
2015-11-03 04:28:42
#1823
Well here's a lil video for you guys.. Sorry these pretty shakey.. the country roads are a bit bumpy an it's hard to keep the phone steady lol



You might notice a lil wheel hop, an that's from a roll in 1st..

@Kyle @Keo @1fastser @SR20NYC @zeneffect @unijabnx2000
Last edited by lynchfourtwenty on 2015-11-03 at 04-42-19.
2015-11-03 15:09:32
#1824
Sick.
2015-11-03 15:13:14
#1825
How do you like the gearing compared to the 5spd?

& do you notice forgetting to go to 6th gear sometimes? lol
2015-11-03 15:20:33
#1826
Gearings ok I don't notice much of a difference really..

I forget about 6th sometimes lol but I used to try for 6th with the 5 speed long before the swap was thought of
2015-11-04 15:01:03
#1827
NICE JOSH!
2016-04-30 00:25:40
#1828
While dinking around with my slave cyl I found my waste gate recirculation pipe is broken

2016-05-10 05:37:18
#1829
Got tired of knowing I had a cracked pipe, plus the wide band reading lean at low rpm or idle was dumb.. so I took my radiator out an we welded it.. not pretty but should hold..



Also clocked my compressor housing a bit so my silicone elbow isn't touching the radiator.. had to beat a dent in the charge pipe to clear the down pipe but that's ok shouldn't hurt flow at all.
2016-05-22 02:33:50
#1830
vent to atmosphere !
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top