Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Lynch's 6spd / VE-T thread

+ Reply To Thread
Posts: 1,721-1,730 of 1,893
2015-03-01 03:25:21
#1721
Lynch which flywheel did u get? test fit the clutch on it yet? and Holy shit Nismoterra throw in a period or 2 lol.
2015-03-01 03:28:37
#1722
Gspec flywheel from marsh tuning, have not test fitted clutch yet..
2015-03-01 03:36:07
#1723
I heard the 1st batch the PP didn't line up right so you had to make a new hole in the pressure plate.
2015-03-01 03:38:16
#1724
Ok hopefully that's not an issue .. hopefully it's been corrected with mine.. We shall see.. thanks for the heads up!
2015-03-01 04:34:48
#1725
The holes kinda lined up on mine... but the dowels were a tad too thick to get them in the holes of the PP I used.
So I rotated the PP so none of the holes interfered and just bolted it down.
2015-03-01 06:02:29
#1726
yeah man i wouldnt do that.. i've seen clutches get fucked up from people not using the dowel pins..

if that is the case with mine i'll just enlarge the holes to fit..
2015-03-01 13:16:28
#1727
Originally Posted by lynchfourtwenty
yeah man i wouldnt do that.. i've seen clutches get fucked up from people not using the dowel pins..

if that is the case with mine i'll just enlarge the holes to fit..


im sure its fine; The Convention trip last year alone was over 1800 miles with a dozen passes at the drag strip.
2015-03-01 17:15:12
#1728
Originally Posted by lynchfourtwenty
yeah man i wouldnt do that.. i've seen clutches get fucked up from people not using the dowel pins..

if that is the case with mine i'll just enlarge the holes to fit..


This happened to me...and diagnosed by Clutchmasters. I thought it was a mfg defect failure but diagnosed it by swirl patterns, suggested missing dowel and I confirmed it.
2015-03-01 18:06:34
#1729
Originally Posted by lynchfourtwenty
Got some spec-v axles for 40 each, no core, to my work



they look to be oem and the boots are in good shape


If you ever need another set of axles you can get them for $65 / $69 shipped new from axle store. I have personally put down over 450whp on them and only broke 1 at the track. The only reason it broke was because the wheel nut came loose.

New Front CV Axle with Warranty Fits Sentra 2 5L Manual Only Left Side NI9533A | eBay
2015-03-03 07:16:28
#1730
everything fits perfect.


+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top