Thread: Lynch's 6spd / VE-T thread

so lately i've been having issues with my car, any time i would go up hill or accelerate to fast it would fall right on its face. i logged it one day with nistune an saw the afr's go full lean plus i had just burned out the walbro so i put the stock pump back in.. so fueling issue made sense. so first thing i got the hookup on another pump from Keo (denso supra turbo pump) but to be sure i replaced the fuel filter first which had no effect. then today i installed the denso pump and all is well in whosville

All that just to say the pump is in? Man I thought you was telling how the turbo magically went in!

next up is injectors! will have the tap an drill bit any day of blairs from nupe

Cool, you need to post more pics.

i think boomstick took some, not sure if he got a shot of the pump ready to go in tho..

i used the walbro sock an clocked it like it should, had to bust a tab off the fitting and shave it perfectly round then used a hose clamp to fasten the sock to the pump, which i think was over kill i dont think it would have or could have came of but better safe then sorry..

ok i know some of you chuckle heads will make comments about me having an intercooler but no turbo, haha real funny.. lol point is i made some progress today an got the intercooler mounted up.

thanks to boomstickracing and benitomalito for helping.

heres some pics.











and yes i know my bumper needs repainted BAD.

the fmic fits really good, only had to drill a few holes and a little hammering to make my brackets work that came with my piping kit.

it sits right up under the bumper support and does not stick out from the bottom what so ever.. this is going to be sleeper as hell.. it just looks like a radiator or something lol

looks good. Glad you are getting there.

Thanks for helping me w that Nistune as well.

Woohoo, progress!

hey no prob man, after my turbo swap we really need to tackle that wiring harness of yours.



Indeed! figured you would like an update fits pretty good doesn't it? i like how snug an tucked in there it is.

You know that's a project. We're gonna pull the intake manifold, re-do the heater core lines so the heat works right, and then re-harness it. Hopefully that will do it.