Thread: Optimal Timing for Avenir DET?

Sorry guys im searching but im trying to start this car ASAP and cannot find the optimal timing for a DET

I know with the NA setup 17 degrees was optimal, What is the optimal settings for an AVENIR DET running 10-14lbs T25 N60 calum basic with a stock base tune.

Thanks,
Daryl

Correction: GTiR DET are supposed to be set at a 20* base, but if you are running a DE program, you may wanna be careful about running that far advanced.

Uhh... Base timing for all SR20 ECUs is 15 degrees unless it is a GTi-R ECU, then it is 20 degrees. Of if it is a custom ECU or tune, it could be anything.

BASE DET Tune Calum BASIC ( JDM AVENIR DET MOTOR ) Program for motor.

Ben's got you covered Calums tunes were set for 15 BDTC

Only Gtir was 20 BDTC

Thanks guys!!! ugh found out I have a bad ECU, Now to find another.. Mine was chipped and I have no fuel no spark and none of my consult programs can talk to the ECU upon inspection it looks like my buddy that soldered in the connector for the Calum messed up so traces so I cant talk to the ECU at all.

I would point you to this thread, but the latest forum update killed my album with the maps

I was wondering what happened. Any eta on a fix? Ps i have some avenir tunes im happy to share i just cant up them

Would love for a good AVENIR TUNE if you have one for my setup.

Basic AVENIR DET 8.5.1 T25 / 370's / N60 MAF / 92 SE-R / 3bar

Pm me you email ill send u what i have. Nothing exact but the n60 should be easily adjusted for by yourself or someone.