Thread: what maf should i use for my avenir n60 or e60

i have the car running on the stock ecu and it all good,but when i but the the ecu that they gave me for the motor it start to bog down....dont know what could it be.can any one help...

You shouldn't be using either of those maf for a stock avenier ECU

Should be using 54C01 MAF.

what maf is that?

That is the Avenier MAF that matches the ECU you are running. You must use the right MAF or the car won't run right. Unless you have the ECU modified with a daughterboard and a map to suit the different one.

do u think if i use the sr20det maf will it work fine???

A MAF is a specific component, if you substitute it, you run a high chance of the car not running right and causing problems that you chase trying to solve when its an incorrect component that is the problem.

The ECU is calibrated specifically to that part. The only variation is when a MAF is the same with a different plug, like the 54C00 (GTI-R) MAF is the same as a 54C01 (calibration wise) except they have a different plug.

Listen to this advice as that is all you need to know. Find out what maf part number works with the ecu you have and use that one.... very easy! I don't know the part number off the top of my head but it shouldn't be too hard to find with a little searching.
Drew