Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Rings? Gasket? Valve seals? Or what?

+ Reply To Thread
Posts: 11-16 of 16
2011-08-29 05:48:42
#11
broken ring lands and possibly broken headgasket. Got detonation bad at some point and blew them. With that low of compression on two cylinders it probably sounds like a wrx engine at low to mid rpm's and very sluggish. If so the pistons are screwed.

Presurizing the crank case is an obvious sign that you have cracked ring lands.
2011-08-29 10:45:45
#12
This is were I'm lost. I know 2cyclinder have low compression but the motor idle fine. And dose not sound like a wrx. This is what I don't get.
2011-08-29 10:56:54
#13
It could have been damaged before you swapped it in since it's a used motor.
2011-08-29 12:09:28
#14
Hey, my engine ran great, and still made great power. But this is what I found on 90psi compression:





2011-08-29 15:44:14
#15
That last one is like "whoa".

Definately sounds like a headgasket and rings(at least).
2011-08-29 19:24:05
#16
That head gasket looks bad well a try to take my head off this week see what it kooks like thanks to the suggestion and advise and also for the pix. Good thing someone else has some what similar problem
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top