Thread: Want to make 350 HP

I heard of Gio heard he does good work but it is tough getting a hold of him plus i heard he deals with obd1 cars. I wanted to try nistune but the only person i found who tunes nistune in fl is in Orlando roughly about 3 1/2 hours away. I went an researched the g18 turbo alittle looks like it might do the job my mechanic was even saying its pretty good but he was suggesting i just use the s15 setup 550 injectors disco potato turbo z32 maf and the get a programmable ecu and fuel pressure regulator and prob some N1 cams

with the E85 im kinda new to it, if i wanted to run it what would i need to change to run it and then would this mean i can only use e85 or would i be able to run 93 octane because right now there is not alot of e85 stations in broward county

you dont need e85 for your goal that would be a waste. pump 93 is fine

you said n1 cams... you left out this was going on a ve motor, but the n1 cams arent the best for boost the stock ones do just fine

keep the w11, get a gt2871r boost to 18+psi, sti 520cc or 50lbs injectors, S4's and your done.

not good advice

a GT2871R will out run 520cc, 50lb or 555cc injs at 15-16 PSI.


555cc injs will net 420 WHP at 4 bar fuel presure yes, but you will need a Nismo FPR and a Walbro 255 HP Pump.


You will get 360 WHP @ 15 PSI and 400-420 at 20 PSI

W11 motor
JWT S4 cams
GT2871R
740cc injs
300zx MAF
3inch exhaust

A 100% proven set up that will move off like a bat out of hell.

I know why.

cause not everybody else does it

do i need the nismo fpr or can i use a fuel lab cause i already orders one

More details on the 18g turbo please.