Thread: Want to make 350 HP

I want to try and make 350 hp maybe even 400. Just wanted some ideas on how i can obtain this. My current set up is an avenir w11 with t 28 turbo 255 walbro fuel pump the head has b13 cams ( i was told it was bigger so i would make some extra power) lsd trans with 6 puck sprung clutch. 3 in down pipe and exhaust straight back. I also have a disco potato turbo but debating if i should use it or not.

http://www.sr20-forum.com/turbo/2918-turbo-charts-best-turbos-your-needs.html

You will need GT2871r for that output. T3 will be easier to make that kind of power. GT3071r will do it on 18-22psi. The GT3076r will do it with 16-18psi. But of course it depends on your setup.

also a JWT or Calum ECU with some 750cc injectors

18g.... people sleep on this turbo and i dont know why it has everything you need in a t2 frame

If you dont have a tuner, a good one, get one before you even think about adding more stuff to your car

dont really know any good tuners in south fl i was gonna go Jim wolf when i was ready to upgrade the turbo and other components needed

from what i hear gio is good, atleast for me it was hard to get a hold of him. but ive heard good from multiple ppl

i know of a couple on here. post up in the florida section and they will point you in the right direction. Jim wolf is a good start but nistune or calum will make you much happier imo

e85 might help a bit.

This is the truth! It is a much cheaper option than the 2871r too. Seriously consider it and get some s4's so u can make the power on lower boost levels