Thread: Greddy Turbo Timer Install ( suppose to be so easy )

Whats up guys, This is suppose to be the most easy "plug n play" basic install yet I cant seam to figure out what needs to be done.

I searched on here and the old forum and havent really found exact information.

Parts I Have :

• Greddy Turbo Timer
• S13 Plug n Play harness
  
  
  

Ive located what I believe to be the right connector that this harness the harness connects in-between but the pins don't seem to be in the right spots.

I also saw I may have to change pins around but I have no clue what pings to move and where to put them.

If anyone has pics, info or any knowledge to share id greatly appreciate it.

Anybody? Nobody's running one of these?

I tossed my harness away and tapped into the ignition harness. 2 igntion, constant, ground and ebrake cable.

nope, no one runs them anymore.

it goes in between your ignition switch and dash harness inside the column covers.

Damn and I thought I could of used this harness ( plug n play as I read )

i thought you need a RNN14 harness to be plug and play?

someone had told me a while ago that the s13 harness is different from our cars. Just tap in the ignition and ebrake harness i did mine about 6-8 years ago, never had a problem with it.

i ran a s13 one years ago had to swap 2 pins dont remember what ones tho

Damn ill have to research it, Wish I knew which to swap.