Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: GTIR To4B compressor housing upgrade

+ Reply To Thread
Posts: 1-10 of 11
2011-06-26 14:15:11
#1
GTIR To4B compressor housing upgrade
Is this the housing I would need to upgrade the compressor housing?

Compressor housing for GT2860RS with 60mm 62 trim wheel : atpturbo.com

Or this one?

Compressor housing for GT2871R with 71mm 56 trim wheel : atpturbo.com

My searching on here didnt come back with many relevant results.
2011-06-26 17:29:16
#2
It's the S14 t28 housing.
2011-06-27 14:30:00
#3
Where can I find something like that? Any sites out there?
2011-06-27 14:51:08
#4
you need a gt28r aka GT2560r aka S14 T28 housing, the Disco housing won't work.

I'm looking for the same thing!

http://www.sr20-forum.com/wanted/46963-s14-t28-gt28r-compressor-housing.html

get in line!! lol
2011-06-27 15:50:51
#5
im also lookin for the same thing.. keo keep us updated if you end up buyin it from miko..
2011-06-27 16:35:19
#6
A disco wheel should fit the gtir since both turbine shaft is 6mm. But finding a wheel may be a problem. Might contact ATP to see if thy can get the gt28r housing.

That also means a gt2871 wheel and housing should fit too!
2011-06-27 19:04:54
#7
I managed to find one of these housing a few months back. Be prepared - it's a HUGE pain in the arse to get the the adapter plate off for the housing. You'll need a nice strong pair of snap-ring pliers, or a lot of patience and some creative thinking.

Here is a picture of the S14 housing I purchased from a member, you can see it is a little bigger in some areas. It definitely spools nice and top-end seems to have benefited from it.
2011-06-27 22:35:46
#8
so all i need is the s14 t28 housing? if soo cool because i have one laying around..!
2011-06-27 22:52:51
#9
Originally Posted by s14det
so all i need is the s14 t28 housing? if soo cool because i have one laying around..!


And the adapter ring that is held on by a snap ring on the turbo cartridge. It uses a different adapter/flange (I'm not exactly sure what to call it...) than the standard GTi-R T28 housing.
2011-06-28 01:06:52
#10
Originally Posted by Nathan_Barstow
And the adapter ring that is held on by a snap ring on the turbo cartridge. It uses a different adapter/flange (I'm not exactly sure what to call it...) than the standard GTi-R T28 housing.



Oh damn.. all I have is the housing.. any idea on where I can get the adapter/flange for it?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top