Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Clutch options for 450whp

+ Reply To Thread
Posts: 11-20 of 31
2011-06-01 02:38:04
#11
Two of the cars are daily drivers and they are fine.
2011-06-01 13:44:45
#12
Originally Posted by unijabnx2000
I have a act 6puck sprung and xtremePP. Drives and feels great.


Originally Posted by cortrim1
this one will do it

ACT XTREME 6 PUCK CLUTCH KIT SENTRA 200SX NX G20 SR20DE | eBay

you could go with a clutch master stage 5 setup as well. the clutch masters setup will hold more power but does not use a sprung disk.


^This is the cluth I have, ACT part #NX9-XTG6. I'll be mating it up to a P11 tranny converted to cable. I plan on making 450-500whp.
2011-06-01 16:24:10
#13
I went out and bought a compitition twin disc recently ....I can not wait to get it in the car ...
2011-06-01 20:09:32
#14
Originally Posted by MR-4Door-SR20DET
^This is the cluth I have, ACT part #NX9-XTG6. I'll be mating it up to a P11 tranny converted to cable. I plan on making 450-500whp.


Whoooops!

I have now spun 2 of these clutches, with a modified flywheel to give even more clamping force, and they couldn't hold 400+WHP.

It is the torque that you should be concerned with as anything over 400lbft (at the flywheel) and you are asking for trouble.

Watch this video and you'll see me roasting the clutch in 4th gear at the strip...

YouTube - ‪DB in car‬‏
2011-06-01 20:23:36
#15
that clutch is rated @ 414 . it doesnt surprise me that you toasted it.
2011-06-01 22:17:23
#16
Originally Posted by MR-4Door-SR20DET
^This is the cluth I have, ACT part #NX9-XTG6. I'll be mating it up to a P11 tranny converted to cable. I plan on making 450-500whp.


I have the same clutch setup. I have had zero issues with any of my act setups. I am planing on make same power as you. If my act will not hold up i will by a cm stg 5 setup. Trying to stay sprung hub if I can help it.
2011-06-02 08:21:56
#17
We will see how bad this fx500 is
2011-06-02 10:51:33
#18
It's really not that bad , it takes some getting used to as any performance clutch but like I said it's very streetable.
2011-06-02 11:20:27
#19
Originally Posted by kzoosho
We will see how bad this fx500 is


it will take getting used to. It will have harsh engagement due to the non sprung disk. I do like cm's pressure plate. I am more worried about shock load and killing gear stacks.
2011-06-02 13:30:31
#20
Originally Posted by cortrim1
I have the same clutch setup. I have had zero issues with any of my act setups. I am planing on make same power as you. If my act will not hold up i will by a cm stg 5 setup. Trying to stay sprung hub if I can help it.


^Same reason here bro. I want to stay with the sprung setup as well. Let me know how it works out for you as I'll be in the 450-500whp range with my setup.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top