was the car in neutral during the video? i noticed the tires spinning, my p10 did that after the install, but its the only car i've fired up on jackstands, had me worried but it never had any issues. is this common?
Yeah they spin when you fire it up with wheels in the air.
0 Likes
Be the first to like this post.
1991 NX - Stalking Horse - mild bolt-ons
1993 Sentra - my freinds 4 door SE-R VVL USDM Tsuru Sunny Supersaloon conversion in progress
2011 Forester XT - DD
"Everybody's got a plan... and then I punch them in the mouth." Mike Tyson
ashton 2 things you can play with to get the tach to read right. 1st go to advanced setup - tach/speed control and and set the tacho to 2 or 3 teeth. one will be closer than the other. 2nd take the dash out and look at the back of the tach there is a potentiometer you can dial the tach with to get it dead on. i had to do this with the Maz works cam trigger. 2 is what i use for the maz sensor and 3 or 4 is what i used for the stock dizzy
Originally Posted by ashtonsser Put some load on it and went to 4800 where the vvl switch point is.....OMG the switchover is loud as hell. This thing is going to scream on the dyno. Stay tuned for thrusday.