Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Year 3 no cold idle, checklist help PLEASE!

+ Reply To Thread
Posts: 231-234 of 234
2013-06-18 18:28:26
#231
Now you tell us!
2013-06-19 08:12:15
#232
😁😁😁
2013-06-25 11:10:14
#233
Originally Posted by BenFenner
I too am surprised it idled at all. I agree it would point to a potential leak still in the system. Or it was idling on PCV vapors alone.




Originally Posted by Vadim
You missed my point, but Ben got it .

Basically we are shocked it even would idle with no IACV, which means you have a leak someplace. Now I've seen throttle bodies (mainly bored out ones) have rather large openings, which would do the same thing.


I think it just dawned on me why it may have still idled warm. Remember I said where I now have my BOV routed to the intake manifold according to Vadims diagram, I formerly had that line going to the intake after MAF/before turbo? So it WAS getting some air....However, not only was that signal nipple in the wrong location but it was at least half the diameter it needed to be. When I would pinch this line the motor would stall.

EDIT: @Vadim @BenFenner <---taggin you both cause I posted this the morning the forum crashed. Not sure y'all got the notification I posted...and I'm curious as to your thoughts.
Last edited by 93specv on 2013-06-27 at 22-17-37.
2013-07-01 03:41:05
#234
Guys? Umm, wanna see something kind of sad but funny at the same time!?!

Rewind to 2009 and skim to post #19 and #20:
http://www.sr20forum.com/turbo/247256-advise-getting-my-car-start-right-when-motor-cold-thanks-2.html
Last edited by 93specv on 2013-07-01 at 03-58-40.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top