Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Took the Daily too the dyno

+ Reply To Thread
Posts: 21-30 of 45
2011-05-01 23:41:58
#21
Was this tuned or just the oe det map?

I hope your planning on tuning, otherwise the race gas isn't going to do you any good.
2011-05-02 01:36:27
#22
Originally Posted by gomba
This will be a good baseline for me as I'm hoping to head to the dyno next weekend Going to dyno @ 17psi as well on 93 octane.

What types of things did you do for your 3 pulls? Did you do all 3 pulls @ 17psi or did you try some other settings?
yes that pretty much the most I went on boost internal wg wasnt holding anymore..most likely the flapper will be welded and go external..

Originally Posted by cory
Was this tuned or just the oe det map?
yes Nistuned a few months ago w/gt28r setup, when the rest of my stuff comes in inj,cams.exhaust it will get tweaked!


I hope your planning on tuning, otherwise the race gas isn't going to do you any good.

ABSOLUTELY!!! Via NISTUNE my bro!(street tune(93 oct) and a drag tune(110 oct)
2011-05-02 01:44:10
#23
nice numbers.

i did 400whp @ 18psi on the same turbo and s4s.

it pulled real nice.

tune and up the boost !

stratton.
2011-05-02 02:01:54
#24
Originally Posted by STRATTON
nice numbers.

i did 400whp @ 18psi on the same turbo and s4s.

it pulled real nice.

tune and up the boost !

stratton.


Nice, 3" exhaust? I am still debating throwing on this new 2871 I have or switching to VE.
2011-05-02 03:18:54
#25
Will - do both
2011-05-02 04:53:01
#26
Originally Posted by STRATTON
nice numbers.

i did 400whp @ 18psi on the same turbo and s4s.

it pulled real nice.

tune and up the boost !

stratton.


damn that's what im shooting for..Did you make that on 93 octane?
Stratt my afr's where at like 10.3-10.5 up top..what was your afr's looking like?
2011-05-02 04:55:53
#27
Originally Posted by klassickrican
damn that's what im shooting for..Did you make that on 93 octane?
Stratt my afr's where at like 10.3-10.5 up top..what was your afr's looking like?


bring that up to 11.9:1, get an external wastegate and 3 inch exhaust and you can make that no problem. The 2871 56 trim with .86 turbine housing is plenty good for it.
2011-05-02 05:36:24
#28
Originally Posted by Will
Nice, 3" exhaust? I am still debating throwing on this new 2871 I have or switching to VE.


full 3 inchs from dp to muffler.

go ve .

Originally Posted by klassickrican
damn that's what im shooting for..Did you make that on 93 octane?
Stratt my afr's where at like 10.3-10.5 up top..what was your afr's looking like?


i dont have the sheet i ended up loosing the few i had, it was 11:7-8:1 93oct with the internal gate.

Originally Posted by Will
bring that up to 11.9:1, get an external wastegate and 3 inch exhaust and you can make that no problem. The 2871 56 trim with .86 turbine housing is plenty good for it.


he can do that on the internal gate no problem, no need for an ext gate.

i did 400 @ 18psi had tunned on better fuel and upped the boost i could have made 30whp no prob.

stratton.
2011-05-02 05:53:20
#29
thats good to hear, cuz my plan is to shoot for 400whp on s3's
(external WG, t31 vband turbine 63ar = .86ar T2)
2011-05-02 09:08:56
#30
Nice that's pretty good for daily
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top