Thread: 2.2-2.3l det?

Anyone have any thoughts on this? How big of a Forged piston can I stuff in there with the stock crank and a bored out block?

I have a DET block sitting here. I have no plans to go VE. So Im thinking of Boring out my Spare DET block and making a big bore DET if I can do it with a machine shop cheaply.

They say 90mm is pushing it...see what you can do with it.

umm...nvrmind.

http://www.sr20-forum.com/vvl/40207-92mm-stroker-crank-checked-off.html

Stratton is 92x92

Imho not worth it.

Stratton.

hahaha lmfao, what happened stratton?

As far as turbo goes im saying.

Stratton.

Exactly, you can already make as much power as you want on stock bore.

I've got a spare block sitting in the garage that will eventually be tested on it's limits as well johnny. Just have to order some pistons before I can take it to the machine shop. One of those go big or go home deals.

What's the downfall of a boosted and hugely bored motor stratton?

Over 90mm you might have issues with hg sealing properly with small area between bores with boost.

it would have to have a lot more low end grunt though wouldn't it? I mean before you reach full boost, and for that matter you'd just make more power more easily across the whole board.

gotcha, has anyone done it?