Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: BOV spring ??

+ Reply To Thread
Posts: 1-6 of 6
2007-12-12 23:34:50
#1
BOV spring ??
I was owndering if I should order the med spring and use it instead of the hard spring in the greddy type r BOV ???
2007-12-13 01:03:38
#2
If its the same as the type s and uses boost to hold it closed I dont see how it would matter just use a vaccum pump to set it.
2007-12-13 06:43:34
#3
that all depends on how much boost you are running homie.. is it getting surge?
2007-12-18 03:33:44
#4
i have the type S and hate it, its a pain if you are running it to atmosphere
2007-12-18 03:36:51
#5
It is only a pain if you are running draw through. Blow through it is fine but if you are draw through then you have to adjust it so that its closed at idle so no stalling. http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-FLA-015&Category_Code=BCS
There is a nice little thing that will help if running open atmosphere.
2007-12-18 05:13:48
#6
i havent been able to adjust my type s yet to not get surging probably have to make it on the softest settings to get it to function correctly i guess it just depends of the psi you are running
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top