Thread: Dyno sheets post them up! -Turbo-

So this 14psi was this 28.5psia? I am guessing you are tuning with a map sensor? I am guessing 375whp on 14psi. That is pretty good for that setup. I've never been on a dynamics dyno, but I'd be interested to see what my car would put down on one.

He said he's runing a z32maf. And I'm sure it made more power. This graph gets cut off at 6500rpm

None of the "available" correction factors work on turbo engines, since it varies based on the map of the charger. Turbos function based on pressure ratio.

Very well said.

Damn ya'll got had by a spammer!

Hey Thats my Dyno sheet how did that get on there. Thanks Bro

that's a bit low for 14psi no? I made the same whp but a litle less wtq at
6psi on a t25.

He probably would have made more but by the looks of his boost graph his turbo is not holding boost or his boost controller isnt working right . I would change those injectors too 370cc is alittle low for 14 psi.

^ you're right I missed that he's falling after 4500

I feel like I'm missing about 10 hp but if you look at the 12 psi run the turbo doesn't spike or drop off after 4500, I realized this once I turned the boost back down to 12psi that anymore boost is just stress on the little snail.

I know the reason I'm missing a few horses and that's because I have the DE intake mani swapped onto the DET motor I did it during the swap for easier installation cause everything was already on the DE mani. This winter I will be either swapping the DET mani back on and all the other parts or just getting the DE mani port matched and adding thermoblock spacers...