Thread: Fan Recomendation

Not yet, Motors not in car yet... Should be going in this weekend.. Been a slow process with work and limited time. I miss driving the car big time.. Gonna be a big change from 140WHP to around 240WHP

I know how that goes. It took me about 3 years to get mine where it is now. 3 years well spent though.

im running two fans from siliconeintakes.com

On my Turbo SE-L I was running two 12" slimfans from SiliconIntakes.com, both are 1600cfm.

They worked fine without any hiccups. I'm now trying to run them on my P11, but looks like the P11 radiator is much taller, thus I can fit 14" now.

Thanks for all the input guys, Ill let you know if I have any problems with 1 12" SPAL

im in the same boat, looking for a suitable fan, currently Im running one OEM puller and a 12" ebay pusher but with the carolinas heat its not cutting it. So I have to upgrade the ebay pusher to a flex a lite 970cfm 12". Keep in mind it's a P10 with a/c with t28 setup.
At 90+ degrees temperature while at idle I have to keep an eye on the temp it has went up a bit twice. What I did was turn on the heater blower in high and the temp quickly dropped, swaeting like a sauna.lolñ

I just bought from Amazon 2 10inch slim fans for 55 bucks I looked at both ebay and amazon

I'm having some issues with cooling with AC on. Either my fans are not cutting it or I have a ton of air bubbles in the system. I just did the whole bleeding rain dance 100% as per fsm, will see if it helps. If not 12" fans here I come .

Im having the same exact problems, does your ac get hot or warm when in traffic and engine temp go up? If so its your fans. I got crappy ass fans from ebay and are worse than my stocks.

I changed to a z32 rad cap, and put some additive auch as water wetter and its so much better, it has only risen a bit at heavy traffic.