Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Fan Recomendation

+ Reply To Thread
Posts: 21-30 of 86
2011-03-09 00:24:03
#21
well some of the motors in the spal fans or the fal are going to last alot longer and probably flow more cfm than a cheapo fan
2011-03-09 00:47:57
#22
i'm running one 10" puller fan and never had cooling problems. I also have no ac condenser blocking airflow.
2011-03-10 01:27:00
#23
Originally Posted by gomba
It's a fan w/simple electronics and cheap...most of the more expensive fans probably use similar if not the same electronics and are also made in China. It's a fan, not an ECU. No reason to go expensive on something that you don't need to. Maybe if it was a full track car I'd go for something a little more high end if anything for the airflow.

Mine work w/out issues and they do their job.

-G


What happens when the fan motor gives out and the car starts to overheat? I am just playing devils advocate.

I have heard mixed reviews about the Mishimoto fans but... they do have a lifetime warranty.
2011-03-10 01:36:50
#24
Originally Posted by Jimithin7000
What happens when the fan motor gives out and the car starts to overheat? I am just playing devils advocate.
You turn on the interior heat and keep on rolling until you can get a new fan installed.
2011-03-10 02:39:12
#25
Originally Posted by BenFenner
You turn on the interior heat and keep on rolling until you can get a new fan installed.


LOL...exactly!

I got 2 fans as well...backups

-G
2011-03-10 03:42:05
#26
60 bucks advance 1 year warranty. I have 2 in mine with a koyo and my temp gauge stays down like the car isnt running
2011-03-10 11:31:46
#27
^ do you have a wideband running on your engine?
2011-03-10 18:24:17
#28
So EBAY 14" fan it is and buy a spare just in case vs and Expensive SPAL. ( unless craigslist finds me a deal ) Any specific CFM im looking for? I see fans for say 14" but with various CFM ratings ESP from SPAL & Flexalite.

How would this work?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110524199945&viewitem=#ht_511wt_941

Spal 14" Medium Profile Push Fan

Spal 14" medium profile pushfan part number #30101510

Airflow 1280 cubic feet per minute
12 volt
draws 11 amps
Last edited by QUiKSR20 on 2011-03-15 at 01-09-11.
2011-03-15 01:09:30
#29
Can anyone confirm that the fan above will work?
2011-03-15 03:31:26
#30
I think I used 12" fans(2 of them), but if people say they've used 14" fans then ya that should work. Why did you replace your stock fans anyways? No room? That was my reason at least. If for any other reason than idk why because stock fans work fine. If I could have used my stock fans I would have been dumb not to. You'll have to splice the custom fans in to the current plugs. Supposedly reversing polarity will change which way the fans spin, so make sure you splice them up correctly for pusher config.

Also, I went w/out ANY fans on a turbo car for quite a few months and even into the summer and I used the car as my DD. You really only have to worry about overheating during traffic or sitting w/the car idling for more than 5 minutes. This was tested w/Consult numerous times, especially in the summer months as I was worried about overheating.

-G
Last edited by gomba on 2011-03-15 at 03-35-12.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top