Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Turbo still surging

+ Reply To Thread
Posts: 11-20 of 34
2011-03-04 01:38:35
#11
Originally Posted by GT2871RBLUBIRD
run it off the back of the intake manifold and use a dedicated line


But were could I find a dedicated line for it?
2011-03-04 01:57:15
#12
Originally Posted by s383_nx2k
But were could I find a dedicated line for it?


just tap the manifold and put in a hose barb.
2011-03-04 02:26:20
#13
Hmm never thought of that thanks
2011-03-06 01:24:29
#14
Ok I got my egr block off kit in and I drilled and taped one of the plates for my bov to go to and its still surging the bov are brand new too
2011-03-06 19:59:32
#15
What kinda BOV is it, HKS? knockoff?
2011-03-06 20:10:43
#16
you should make sure your bov is good, that looks like a knock off
2011-03-06 20:16:24
#17
even knock offs work pretty well, does this have the screw in the back? some of them have the screw on the back of the bov and it increases spring pressure or decreases the pressure dpeending onthe boost pressure
2011-03-06 20:17:19
#18
From what I can tell most drift cars have em and most of em that I can tell the turbo surges pretty bad. Id recommend to go with a different bov.
2011-03-07 04:19:00
#19
It is a knoc off and it does have the spring in the back and tsuruser mentioned that it could be the fact that I have a manual boost control
2011-03-07 04:21:33
#20
I had a actual hsk bov before this one and it was serging a bit then to the only reason I got this one was the was a leak around the weld to the pipe
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top