Thread: Intake manifold pics....need opinions!

That Thailand intake manifold is looking pretty nice @$400...hmmmm!

Wow, $300 used...think about it. Might be nice of the community was flooded w/these.

-G

the thai manifold would be hard to compete with the price its at, esp if there were alot of interest in it, might be able to swing it down some

Ashton tried to get a group buy for the Thai manifold. I checked the guy out and he has good feed back from the 2jz crowd and the rb26 peeps. Personally I was looking at a BJ's manifold but would love another option. I would want to use the stock fuel rail.

Yeah, well everyone seemed to think that there was no way a $400 intake manifold could possibly make more power than stock. lol. Oh and they wanted it to be perfect without having to do any tweeking at all. I mean really, the manifold is pretty good for the price. It took me all of maybe an hour to clean up the runners where the welds were and to get the other little things worked out. You get what you pay for is true. But its still a nice quality manifold for the price. Again, and almost anything is better than stock thats for sure. And its still a properly designed manifold with a good plenum volume, good size velocity stacks, perfect length runners and again retained all the essentials.

For a N/A manifold to be made no one design would suite all.

Runner length and diameter of stacks/runner would depend on size of the motor and supporting mods etc.

Manifold posted looks good. Good luck.

The manifold posted looks very close to my manifold. I know me and kong are local and willing to test some designs if you'd like. My 92x86 2.3 and his 2.0...

Don't forget the lowport guys!

if i get my act together i could test a turbo highport version. it's unlikely i'll be out of the garage this spring/summer though. i will stop by if i get it out. i don't know if you remember me but i stopped by asking if you could make me a manifold and I have a red sentra with low offset wheels.

This! Cory always ready to step up to the plate

I will take an na ve mani in a heartbeat when available, I still might if you are interested in making a one off. PM me a price you are thinking of if you don't mind.

If someone buys one take pics of the inside of the manifold. When u do it like that with the stock flange you have to port it down so there isn't a lip for the air coming into the motor. I had one of those manifolds a long time ago for my RB20 and that is what I noticed. I sold it and got a better one didn't even bother to try to port it out way too much work for the money I had to put into it.