Thread: What belt do i use with no ac?

I am going to take off my ac compressor, so what size belt would i use?

btw its a gtir motor if that makes a difference

count the ribs and take a measurement between the two pulleys. Go to advanced and get a belt that matches that. BTW, its okay to use a 3 rib with a 4 rib pulley and 4 rib with 5 rib pulley etc.

Got mine from RockAuto.com. I think it was like $8.

If you do a search on the other forum there's a thread with the part# for the NAPA no AC belt. That's what I used

i tried looking for that, i seen a few autozones and oem numbers....called the dealership and no such numbers came up

napa is your best bet, autozone sucks when it comes to belts.

GOODYEAR Part # 4040327 4 Ribs / Effective Length 32.75" / Outside Length 33.5"
Poly-V; w/o AC; Alternator

Choose: [Wholesaler Closeout -- 30 Day Warranty] (Only 3 Remaining) ($4.38)[Regular Inventory] ($8.40) -
- Stocked in outlying warehouse--shipping delayed up to 1 business day *$4.38*

From: RockAuto Auto Parts

Hope that helps...

http://www.sr20-forum.com/general-sr20/1140-common-parts-list-w-s.html common parts list...always a winner.

It depends on what diameter your alt pulley is. I had a 32inch one but I changed the alt and had to find a smaller belt. Just find a piece of string or wire and wrap it around the pulleys, then measure to get an idea.