Thread: Big Numbers On SR22VE 20V

i <3 miko

Sick ride. How will 600hp be contained in a front wheel drive sentra? Sadly drivetrain is always a limiting factor in our cars. Nonetheless a very nice turn out. The car looks great as well.

600hp will never contained or really workable in a fwd chassis.

stratton.

Cam settings for 20V cams were

Intake = 0

Exhaust = +5

There is a bit of overlap on the 20v lows so you can dial out some overlap by advancing the ex?

met a guy at the dyno ve motor cp pistons eagle rod 6262 turbo and did 641hp on 25 psi with a z32 maf chipped ecu. So to me i figure that porting and 2.2 motor is somtimes not called for. or is this guy lying about what he have in his car

Well look at it like this.

every 2L VE motor I have seen at 20 PSI makes between 480-510 WHP.

This 2.2L VE with a GT37 Turbo made 543 @ 19 PSI. At 25 PSI it should make 610-620 WHP.

So you have to ask yourself whats up with those numbers. Someone is lying about something and it is not me.

It is also intresting to know how he was able to tune the ECU with the Z32 MAF at 641 WHP if the Z32 MAF si good for a readable 550 WHP.

He probably made 641 WHP but he is not telling you whats up.

i think it had a emanage and a 87mm bore thats it

no way man

That guy either probably paid someone to do his build and really has no idea what he has or is a bullshitter. The Z32 maf thing is what makes me think he really doesn't know what he has at this point and someone else built it and or tuned it for him.