Thread: precision 62262 manifold

What compress housing and what Log manifold are you running?

its a 70 comp housing an a fmax log mani

Most fmax are made around .60 compressor housing. You should get a protech, they can make one for a .70 for sure.

damn no wonder you think the manifold i posted above from ebay will work?

compressor housing will hit the rad support. do you have a pic of your current set up and where it's hitting?

i have a .82 ar comressor housing i was talkin to one of my buddys and he said i would have to get a t04 style manny with the t3 flange and recomemded me to this site
SR20 Log FWD Spoolin Performance

no i will get pics tomorrow

It's all on the position of the flange.

you have a .82 turbine housing and a .70 compressor, you will run into the same problem as him.

the spoolin manifold will clear you head/block but you have to run pusher fans

here's a thread of it in stalled with a .60 compressor with plenty of room to spare

hey everyone look at what im installing monday - SR20 Forum

i do have pusher fans, thanks for the info keo its really helpful