Thread: Gtir Turbo Manifold

I really like this manifold and i want to get it but does anyone know if it will have problems with turbo location? or if its a t2 manifold? i want to put it on my bluebird b14. or does anyone have pics of this manny installed? they show a pic of it installed but thats not the same manny.
Pulsar GTiR GTI-R RNN14 SR20DET Exhaust Manifold Header - eBay (item 290507879428 end time Dec-09-10 22:55:18 PST)

The manny in the pic is the same, it's just heat wrapped. if you want a GTI-R manny you can find a stock one here on the forum for cheaper and i bet it will last longer than that Ebay piece.

and yes that will fit but you might have to do some light modification since you have a bb motor...

Yea bro, like I told you ealier I would stay away from ebay china stuff like this. JT also brought up some good points.

yeah your right lou i think im going to stick with the stock manifold for now till i upgrade to a t3/t4. plus im getting that gtir t28. ill send you pics tomorrow when i get it.

The rapped manifold and manifold showed in the ebay add are not the same

exh 1 and 2 are close to the motor and 3 and 4 are on rad side for rapped manifold

on ebay pic manifold runners 1 and 4 are close to motor and 2 and 3 are close to radiator.


The ebay pic manifold will put the turbo into the rad, the angle of the flange is setup for RWD.

Chicago is kinda close.

Miko with the eagle eye.