![](/images/threads/icons/0.png)
I can try and post some pics, that might be the exact radiator I used
as far as mounting it. I did a little bending and metal work on the bottom of the core support where the stock radiator mounts are. I found a hose, lower, at NAPA that fit great. The upper hose was a little more complicated. We welded on our own neck that I also bought from summit. I used a Samco hose and cut it to fit.
The mounting tabs you see on it are the ones I used, trimmed a little and bolted it in. That thing does not move.
Fans I used a 11in electric puller and an 8in pusher on the driver side. To do this you need to notch the bumper core support a bit. This was done becuase of my set-up. Otherwise two 11in electrics should fit fine.
Let me know if you have any other questions
![:)](images/emoji/happy/smile.gif)
The mounting tabs you see on it are the ones I used, trimmed a little and bolted it in. That thing does not move.
Fans I used a 11in electric puller and an 8in pusher on the driver side. To do this you need to notch the bumper core support a bit. This was done becuase of my set-up. Otherwise two 11in electrics should fit fine.
Let me know if you have any other questions