Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: FWD SR20DETT doable?

+ Reply To Thread
Posts: 51-60 of 67
2010-09-05 21:34:10
#51
Yah just a typical Mitsubishi four banger.
2010-09-05 21:40:58
#52
oh yah typical lol, is this a prototype or ppl actually using it
2010-09-05 21:44:03
#53
It was an experiment for shit and giggles. Not sure how well it did, or if anyone else bought it or bought into it. Or if it ever actually was put in a car.
2010-09-06 01:13:55
#54
That looks clean, could be nice seeing it run which could accelerate its marketability if that's what they're after...
2010-09-06 01:35:15
#55
hell i would like to see how it accellerates in general forget about marketability, sure its probably not going to make peak power but i bet its extremely responsive with a pretty big powerband
2010-09-06 01:58:33
#56
1 turbine per cylinder if this is so what more if there's two
2010-09-06 05:20:38
#57
I did this about 5years ago in my B13 on a U13 Sr20det engine ......used a parallel setup with two T3 turbos with A/R of .3 Turbines.....Had some lag but when she boosted it was excellent. Didn't do anything much but played with timming, spark plugs and boost levels.... Original U13 Front mount Intercooler with turbos mounted one above the other...
Definitely had to run slimline fans in front of the Condenser....Y'ed both intake and exhaust.... Had this thing running for about 2 years until a turbine seal blew giving way to a spun bearing.....
2010-09-06 08:27:59
#58
Originally Posted by Speedracer
I did this about 5years ago in my B13 on a U13 Sr20det engine ......used a parallel setup with two T3 turbos with A/R of .3 Turbines.....Had some lag but when she boosted it was excellent. Didn't do anything much but played with timming, spark plugs and boost levels.... Original U13 Front mount Intercooler with turbos mounted one above the other...
Definitely had to run slimline fans in front of the Condenser....Y'ed both intake and exhaust.... Had this thing running for about 2 years until a turbine seal blew giving way to a spun bearing.....


what numbers did you put up and how did you tune it? What was the cause of your turbine seal blowing?
2010-09-06 13:33:37
#59
do you have any videos of this setup or pictures just curious
2010-09-07 19:33:34
#60
Sinnerman: Never really dynoed the car so got no numbers per say. The Turbos that was in there were used turbos so i chalked it up to turbine seal failure. The oil ran low and hence started to hear a bearing knock.

GT2871RBLUBIRD: No videos but should have some pics lying around somewhere...Will have to try and locate.....no promises....
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top