Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: FWD SR20DETT doable?

+ Reply To Thread
Posts: 61-67 of 67
2010-09-08 04:50:58
Must have been nice seeing it run, why did you give it up and not just replaced the busted turbos with new ones?
2010-09-08 05:21:12
Well to be honest at that point in time couldn't afford new turbos and parts for engine so i took it off and ran a highport sr20de with some mild boost on stock compression single Turbo. Using sr20det injectors, ecu, maf with adjustments to timming and sparkplugs on pump gas got away with at least 6-7psi on 9.5:1 comp.
2010-09-08 21:12:42
Originally Posted by Coheed
Two different sizes will not work as well. Look at how the GTR is engineered and you have a pretty good start.

The GTR treats each side of the engine individually. That means that each side of the engine has its own 3 cylinders, turbo, intercooler, maf, throttle body etc. It's like they stuffed two 3 cylinder engines in the bay. It works.

The RB26DETT has 3 sets of twin independent throttle bodies. That is two throttle bodies per housing and 3 housings. I've worked on two of them.
2010-09-08 21:14:47
Pretty sure Coheed was talking about the V-6 GTR not the I-6 ones.
2010-09-09 03:36:14
If you bore out an SR to 2.4L going with the displacement and compression idea would it be enough to spool 2 disco potato at 2500rpm?
2010-09-09 13:54:47
i dont think it would be worth it personally, its alot of money for a setup that really isnt going to 100% be as efficdent as a inline 6 with 3 cylinders per turbo. with the right compression ratio i definitly think it could work, but the higher compression might limit you on the ammount of boost able to be ran.
2010-09-09 13:59:29
twin gt22's ftw!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top