Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: jwt ecu question

+ Reply To Thread
Posts: 1-7 of 7
2010-07-26 06:17:29
#1
jwt ecu question
if i have a ecu for 96lb inj/light maf can the maf be changed on a safc to a z32?
2010-07-26 07:10:07
#2
What is a light maf? Yes MAF setups can be changed via SAFC. You better have some way of monitoring your a/f ratio though.
2010-07-26 07:22:44
#3
lightning maf yea i have a innovate lc-1 just wondering what the settings for the safc would be
2010-07-26 15:40:20
#4
I would have to guess 1 in 2 out. I believe the lightning maf falls under one.

Search for the safcII wiring and settings instructions online. I know there is a PDF out there of it somewhere as ive looked at it. It will tell you what number to use with what maf.
2010-07-26 22:04:40
#5
why not use the lightning maf its better for blow through and cheaper to replace. Not to mention it can read higher than the z32 maf.
2010-07-27 02:55:37
#6
For 100 bucks you can send it out to be re tuned. Allot cheaper than an SAFC and hacking your harness up.
2010-07-27 04:43:33
#7
see the thing is i have a sr20venosfreak ecu basicallly a calum and the chips are tuned for 72lb/z32 because thats what i have in the car or so i thought. the company i ordered the injectors from messed up and i ended up with delphi 95lb inj instead. I have the safc installed already and thats how i figured out to check the part number etc hed on the injector because no way on a 72lb program should i need to pull 21% up top just to get the a/f's to 10.8 .im fighting to get the right ones or a refund through paypal i guess we will see how that goes.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top