car no spark or fuel
Okay so I got my new precision 6262 installed finally well on the way home from the shop my starter goes out and starts bellowing smoke. So I get home change the starter and bam car will turn over but wont start. Now in the process of taking the old starter off i didnt disconnect the battery and the power on the battery did strike something. So now fuel pump will prime and then turn off and my fpr gauge will go from 40psi to 0 psi. And for some reason I dont have spark now anybody got any ideas thanks in advance. CAr was running fine before.
Be the first to like this post.
Back to top
