Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: T2 bottom mount tubular mani

+ Reply To Thread
Posts: 51-55 of 55
2010-04-22 20:38:24
#51
Originally Posted by 200sx
my hotside comes a little high and runs through the body right bihind the passenger side headlight and down in front of the passenger side tire before it gets to the intercooler


I had to change mine when I went external gate. The orignal route when through the wash bottle hole. You can also reclock the turbo some the outlet faces down. No mater what you will need to alter the hot side. On my new setup the out let faces down the the hot side goes beside the radiator.
2010-04-22 20:52:47
#52
yea, id like to do that but dont have the fab resoursces for it, my boy does but he is a little whiles away. although no we mildy changes my piping a little cause mine to goes through the wash hole as yours did but instead of the piping going over the manifold like most of them, we change it where it kinda goes around the front of the mani with a tid bit of it still going over. plus the location of the flange on the mani id a little on the left side of that major hump at the port collector area so im thinking i can get away with the mani and wg with no prob, just my prob may be the dump tube not fitting or the exhaust getting blown right into the pipe, should have it all by saturday so thats when ill start to mock it all up...
2010-04-23 03:46:59
#53
cortrim1 is your wastegate recirculated?
2010-04-23 16:53:29
#54
Originally Posted by mike4387
cortrim1 is your wastegate recirculated?


nope. It will be a open dump on the new setup as well.
2010-04-23 19:09:50
#55
thanks contrim...been a big help!
ANYONE HAVE PICS A THEIR GTIR MANI W/ EXT. GATE RUNNING HOTSIDE PIPE THAT GOES UP AND OVER THE MANIFOLD AREA?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top