Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Turbo rebuild Q's please help

+ Reply To Thread
Posts: 1-10 of 12
2010-04-03 03:21:48
#1
Turbo rebuild Q's please help
Okay guys im planning on rebuilding 2 turbos I have from a 300zx twin turbo.

So they are T25 turbos from what i have been told.


Okay one of the turbos seems to have oil on the compressor side so that means the seal went out. So im trying to find a rebuild kit that has that seal so thats my question. I found a kit but i need to now if it has the seal and if it does which one is it?

TURBO CHARGER REBUILD REBUILT KIT T25 T28 SX S13 S14 : eBay Motors (item 280484984974 end time Apr-02-10 22:36:24 PDT)


Thanks for your guys help im trying to turbo my VE with one of these turbos.
2010-04-03 06:09:04
#2
tekki just made a thread about rebuilding turbo's. find that and it should solve all of your problems
2010-04-03 13:37:10
#3
Yep its there in the pic
2010-04-03 14:22:15
#4
http://www.sr20-forum.com/forced-induction-turbo/21597-how-rebuild-t25-t28-turbo-pic-heavy.html

Here's a link to the turbo rebuild thread
2010-04-03 21:38:51
#5
. Pretty straight forward, too.
2010-04-04 04:34:43
#6
I just looked over it quickly looks pretty thorough. I didn't buy the snap ring pliers. I just drilled two 1/8in or so holes in a small bench vise and stuck some nails in the holes. This method cost about $6 from the local hardware store instead of $60 and having to wait for the mail for the pliers
2010-04-04 05:26:48
#7
thanks guys i just ordered the kit
2010-04-04 11:36:53
#8
Jere,

harbor freight for the snap ring pliers = 11.95. 8 pieces
2010-04-04 15:03:16
#9
Harbor Freight Tools

Oh ok I never knew they had them, that would have saved a head ache. Are they in that link above?
2010-04-04 15:35:36
#10
Thanks guys i just ordered a complete kit with everything
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top