Thread: setting Greddy Profec B2 w/adjustable actuator(0-25psi)

I hooked up the Greddy E.B.C. and pretty much know how to set that up.
My question is at what psi should I set my actuator to?
My set-up is Det t28r w/hks adjustable actuator(0-25psi).
I wanna run Lo boost @ 8psi and Hi boost @18psi..thanks

didnt you just answer your own question?

. Very true.

you have to set the waste gate pressure at or below the low boost setting. I am setting mine for 8-10 psi with a 15psi low boost setting and a 24-26psi high setting.

thanks cortrim1! ^thats what i ment^
LOL!the G.E.D didnt kick in the earlier question!

it happens.

I got another question..the profec valve unit(solenoid) has three ports Com,No & NC ports.
im using the COM & NO ports..what I do with the NC port? leave it open or cap it off?:o

leave it open.

OK! took it for a spin and it works great! thanks again!

ur Greddy Profec B2 is on psi or kpa?